Tuesday 20 September 2011

Scenario1.tcl

# ======================================================================
# Define options
# ======================================================================
set val(chan)           Channel/WirelessChannel    ;# Channel Type
set val(prop)           Propagation/TwoRayGround   ;# radio-propagation model
set val(netif)          Phy/WirelessPhy/802_15_4
set val(mac)            Mac/802_15_4
set val(ifq)            Queue/DropTail/PriQueue    ;# interface queue type
set val(ll)             LL                         ;# link layer type
set val(ant)            Antenna/OmniAntenna        ;# antenna model
set val(ifqlen)         150                         ;# max packet in ifq
set val(nn)             4                         ;# number of mobilenodes
set val(rp)             AODV                       ;# routing protocol
set val(x)  50
set val(y)  50
#Queue/DropTail/PriQueue set Prefer_Routing_Protocols    1
#LL set mindelay_                50us
#LL set delay_                   25us
#LL set bandwidth_               0       ;# not used
#LL set-limit 1000000




# ================================= 
# Antenna Settings 
# ================================= 
Antenna/OmniAntenna set X_ 0 
Antenna/OmniAntenna set Y_ 0 
Antenna/OmniAntenna set Z_ 1.5 
Antenna/OmniAntenna set Gt_ 1.0  
Antenna/OmniAntenna set Gr_ 1.0 
#======================
#Physica layer setting 
#======================
Phy/WirelessPhy set freq_ 2.4e+9 ;# The working band is 2.4GHz 
Phy/WirelessPhy set L_ 0.5   ;#Define teh system loss in TwoRayGround 
Phy/WirelessPhy set  bandwidth_  28.8*10e3   ;#28.8 kbps 
# For model 'TwoRayGround'
# Thereceived signals strenghts  in different distances 
set dist(5m)  7.69113e-06
set dist(9m)  2.37381e-06
set dist(10m) 1.92278e-06
set dist(11m) 1.58908e-06
set dist(12m) 1.33527e-06
set dist(13m) 1.13774e-06
set dist(14m) 9.81011e-07
set dist(15m) 8.54570e-07
set dist(16m) 7.51087e-07
set dist(20m) 4.80696e-07
set dist(25m) 3.07645e-07
set dist(30m) 2.13643e-07
set dist(35m) 1.56962e-07
set dist(40m) 1.20174e-07
Phy/WirelessPhy set CSThresh_  ;#$dist(40m)
Phy/WirelessPhy set RXThresh_  ;#$dist(40m)
#Phy/WirelessPhy set CPThresh_ 10 
# According to the Two-Ray Ground propagation model 
#Pr(d) = Pt*Gt*Gr*ht*ht*hr*hr/(d*d*d*d*L)
# thus the transmitted signal power
#average Pt= d*d*d*d*L*Pr(d)/(Gt*Gr*ht*ht*hr*hr) = 1mW     
Phy/WirelessPhy set  pt_ 0.001
#Specified Parameters for 802.15.4 MAC
Mac/802_15_4 wpanCmd verbose on   ;# to work in verbose mode 
Mac/802_15_4 wpanNam namStatus on  ;# default = off (should be turned on before other 'wpanNam' commands can work)

# Initialize Global Variables
set ns_  [new Simulator]
# Tell teh simulator to use teh new type trace data 
$ns_ use-newtrace
set scenario1   [open scenario1.tr w]
$ns_ trace-all $scenario1
#Define the NAM output file
set scenario1nam     [open scenario1.nam w]
$ns_ namtrace-all-wireless $scenario1nam $val(x) $val(y)
$ns_ puts-nam-traceall {# nam4wpan #}  ;# inform nam that this is a trace file for wpan (special handling needed)

# set up topography object
set topo       [new Topography]
$topo load_flatgrid $val(x) $val(y)

# Create God 
set god_ [create-god $val(nn)]
set chan_1_ [new $val(chan)]

# configure node
$ns_ node-config -adhocRouting $val(rp) \
  -llType $val(ll) \
  -macType $val(mac) \
  -ifqType $val(ifq) \
  -ifqLen $val(ifqlen) \
  -antType $val(ant) \
  -propType $val(prop) \
  -phyType $val(netif) \
  -topoInstance $topo \
  -agentTrace OFF \
  -routerTrace OFF \
  -macTrace ON \
  #-movementTrace OFF \
                -energyModel "EnergyModel"\
                -initialEnergy 100\
                -rxPower 0.3\
                -txPower 0.3\
  -channel $chan_1_ 

for {set i 0} {$i < $val(nn) } {incr i} {
 set node_($i) [$ns_ node] 
 $node_($i) random-motion 0  ;# disable random motion
 $god_ new_node $node_($i)
}
#Lable the sink node 
$ns_ at 0.0 "$node_(3) NodeLabel Sink"
# Define the nodes positions 
$node_(0) set X_ 15.0
$node_(0) set Y_ 20.0
$node_(0) set Z_ 0.000000000000
$node_(1) set X_ 25.0
$node_(1) set Y_ 20.0
$node_(1) set Z_ 0.000000000000
$node_(2) set X_ 35.0
$node_(2) set Y_ 20.0
$node_(2) set Z_ 0.000000000000
$node_(3) set X_ 5.0
$node_(3) set Y_ 5.0
$node_(3) set Z_ 0.000000000000
#set null [new Agent/Null]
#$ns_ attach-agent $node_(3) $null
# Define the cbr traffic 
proc cbrtraffic { src dst interval starttime stoptime packetsize stage } {
   global ns_ node_
   set udp([expr $src + $stage]) [new Agent/UDP]
   eval $ns_ attach-agent \$node_($src) \$udp([expr $src + $stage])
   set null([expr $src + $stage]) [new Agent/Null]
   eval $ns_ attach-agent \$node_($dst) \$null([expr $src + $stage])
   set cbr([expr $src + $stage]) [new Application/Traffic/CBR]
   eval \$cbr([expr $src + $stage]) set packetSize_ $packetsize
   eval \$cbr([expr $src + $stage]) set interval_ $interval
   eval \$cbr([expr $src + $stage]) set random_ 0
   #eval \$cbr($src) set maxpkts_ 10000
   eval \$cbr([expr $src + $stage]) attach-agent \$udp([expr $src + $stage])
   eval $ns_ connect \$udp([expr $src + $stage]) \$null([expr $src + $stage])
   $ns_ at $starttime "$cbr([expr $src + $stage]) start"
   $ns_ at $stoptime "$cbr([expr $src + $stage]) stop"
# $ns_ at $stoptime "$node_($src) reset" 
#$ns_ at $stoptime "$node_($dst) reset" 
}

## Establish traffic between nodes 
 puts "\nTraffic: cbr"
   Mac/802_15_4 wpanCmd ack4data off
   puts [format "Acknowledgement for data: %s" [Mac/802_15_4 wpanCmd ack4data]]
#src dest interval start stop packetsize stage 
#the first sensor activity
cbrtraffic 0 3 0.2 0.1 0.9 5 1;# target is in the range from 15 to 10 meters from the first sensor (sensed signal=5 bytes)
cbrtraffic 0 3 0.2 1.0 1.9 8 2;# target is in the range from 10 to 5 meters from the first sensor (sensed signal=8 bytes) 
cbrtraffic 0 3 0.2 2.0 3.9 10 3;#target is in the range from 5 to 0 meters from the first sensor (sensed signal=10 bytes) 
cbrtraffic 0 3 0.2 4.0 4.9 8 4;# target is in the range from 5 to 10 meters from the first sensor (sensed signal=8 bytes) 
cbrtraffic 0 3 0.2 5.0 5.9 5 5;# target is in the range from 10 to 15 meters from the first sensor (sensed signal=5 bytes)
cbrtraffic 0 3 0.2 6.0 6.9 3 6;# target is in the range from 15 to 20 meters from the first sensor (sensed signal=5 bytes)
cbrtraffic 0 3 0.2 7 7.9 1 7;# target is in the range from 20 to 25 meters from the first sensor (sensed signal=5 bytes) 
#the second sensor activity
cbrtraffic 1 3 0.2 0.2 0.9 1 1; # target is the range of 25 to 20 meters far from the sensor(sensed signal=1 bytes) 
cbrtraffic 1 3 0.2 1 1.9 3 2; # target is the range of 20 to 15 meters far from the sensor(sensed signal=3 bytes) 
cbrtraffic 1 3 0.2 2 2.9 5 3; # target is the range of 15 to 10 meters far from the sensor(sensed signal=5 bytes) 
cbrtraffic 1 3 0.2 3 3.9 8 4; # target is the range of 10 to 5 meters far from the sensor(sensed signal=8 bytes) 
cbrtraffic 1 3 0.2 4 5.9 10 5; # target is the range of 0 to 5 meters far from the sensor(sensed signal=10 bytes) 
cbrtraffic 1 3 0.2 6 6.9 8 6; # target is the range of 5 to 10 meters far from the sensor(sensed signal=8 bytes) 
cbrtraffic 1 3 0.2 7 7.9 5 7; # target is the range of 25 to 20 meters far from the sensor(sensed signal=5 bytes)
cbrtraffic 1 3 0.2 8 8.9 3 8; # target is the range of 25 to 20 meters far from the sensor(sensed signal=3 bytes)
cbrtraffic 1 3 0.2 9 9.9 1 9; # target is the range of 25 to 20 meters far from the sensor(sensed signal=1 bytes) 
#the third sensor activity
cbrtraffic 2 3 0.2 2 2.9 1 1; # target is the range of 25 to 20 meters far from the sensor(sensed signal=1 bytes)
cbrtraffic 2 3 0.2 3 3.9 3 2; # target is the range of 20 to 15 meters far from the sensor(sensed signal=3 bytes)
cbrtraffic 2 3 0.2 4 4.9 5 3; # target is the range of 15 to 10 meters far from the sensor(sensed signal=5 bytes)
cbrtraffic 2 3 0.2 5 5.9 8 4; # target is the range of 10 to 5 meters far from the sensor(sensed signal=8 bytes) 
cbrtraffic 2 3 0.2 6 7.9 10 5; # target is the range of 0 to 5 meters far from the sensor(sensed signal=10 bytes)
cbrtraffic 2 3 0.2 8 8.9 8 6; # target is the range of 5 to 10 meters far from the sensor(sensed signal=8 bytes) 
cbrtraffic 2 3 0.2 9 10 5 7; # target is the range of 25 to 20 meters far from the sensor(sensed signal=5 bytes) 

# defines the node size in nam
for {set i 0} {$i < $val(nn)} {incr i} {
 $ns_ initial_node_pos $node_($i) 5
}

# Tell nodes simulation ends at 10.0
for {set i 0} {$i < $val(nn) } {incr i} {
   $ns_ at 10 "$node_($i) reset";
}
$ns_ at 10 "stop"
$ns_ at 10 "puts \"\nNS EXITING...\""
$ns_ at 10 "$ns_ halt"

proc stop {} {
    global ns_ scenario1 scenario1nam
    $ns_ flush-trace
    close $scenario1
    #set hasDISPLAY 0
    exec nam scenario1.nam &
 
}
puts "\nStarting Simulation..."
$ns_ run

9 comments:

  1. Hello!
    I run your code, and have a problem. The code has error :" Mac/802_14_5 not define", at command "Mac/802_14_5 wpanCmd verbose on".
    Can you help me solve this problem?
    Thank you very much!!

    ReplyDelete
  2. not understang simulation xatly

    ReplyDelete
  3. Replies
    1. If you know how the cbr traffic works, would you please explain it to me?

      Thank you

      Delete
  4. Would you please explain the format of the cbr traffic?

    Thanks a lot

    ReplyDelete
  5. thanx a lot for this code .. please explain the crb traffic...

    ReplyDelete
  6. i need a file of awk troughtput for this code
    please help me

    ReplyDelete
  7. Please can u explain how the cbr traffic part of the code works? i try my best to understand the code but i cant

    ReplyDelete